Chapter 8 WAN Screens
Figure 102 NETWORK > WAN Route
The following table describes the labels in this screen.
Table 30 NETWORK > WAN Route
LABEL | DESCRIPTION | |
Route Priority |
| |
|
| |
WAN | The default WAN connection is "1' as your broadband connection via the WAN port | |
Traffic Redirect | should always be your preferred method of accessing the WAN. The default | |
Dial Backup | priority of the routes is WAN, Traffic Redirect and then Dial Backup: | |
You have two choices for an auxiliary connection (Traffic Redirect and Dial | ||
| ||
| Backup) in the event that your regular WAN connection goes down. If Dial | |
| Backup is preferred to Traffic Redirect, then type "14" in the Dial Backup | |
| Priority (metric) field (and leave the Traffic Redirect Priority (metric) at the | |
| default of "15"). | |
| The Dial Backup field is available only when you enable the corresponding dial | |
| backup feature in the Dial Backup screen. | |
|
| |
Windows | NetBIOS (Network Basic Input/Output System) are TCP or UDP packets that | |
Networking | enable a computer to connect to and communicate with a LAN. For some | |
(NetBIOS over | services such as PPPoE or PPTP, NetBIOS packets cause unwanted calls. | |
TCP/IP): |
| |
|
| |
Allow between | Select this check box to forward NetBIOS packets from the LAN to the WAN and | |
WAN and LAN | from the WAN to the LAN. If your firewall is enabled with the default policy set to | |
| block WAN to LAN traffic, you also need to enable the default WAN to LAN firewall | |
| rule that forwards NetBIOS traffic. | |
| Clear this check box to block all NetBIOS packets going from the LAN to the WAN | |
| and from the WAN to the LAN. | |
|
| |
Allow between | Select this check box to forward NetBIOS packets from the WAN to the DMZ and | |
WAN and DMZ | from the DMZ to the WAN. | |
| Clear this check box to block all NetBIOS packets going from the WAN to the DMZ | |
| and from the DMZ to the WAN. | |
|
| |
Allow between | Select this check box to forward NetBIOS packets from the WLAN to the WAN and | |
WAN and WLAN | from the WAN to the WLAN. | |
| Clear this check box to block all NetBIOS packets going from the WLAN to the | |
| WAN and from the WAN to the WLAN. | |
|
|
152 |
| |
ZyWALL 2 Plus User’s Guide |
| |
|
|
|