ZyXEL Communications 2 Plus 8.12 Configuring Advanced Modem Setup, 8.11.3 Response Strings

Chapter 8 WAN Screens

8.11.3 Response Strings

The response strings tell the ZyWALL the tags, or labels, immediately preceding the various call parameters sent from the WAN device. The response strings have not been standardized; please consult the documentation of your WAN device to find the correct tags.

8.12 Configuring Advanced Modem Setup

Click the Edit button in the Dial Backup screen to display the Advanced Setup screen.

"Consult the manual of your WAN device connected to your dial backup port for specific AT commands.

Figure 110 NETWORK > WAN > Dial Backup > Edit

The following table describes the labels in this screen.

Table 37 NETWORK > WAN > Dial Backup > Edit

LABEL	DESCRIPTION
AT Command
Strings

Dial	Type the AT Command string to make a call.

Drop	Type the AT Command string to drop a call. "~" represents a one second wait, for
	example, "~~~+++~~ath" can be used if your modem has a slow response time.

Answer	Type the AT Command string to answer a call.

	169
ZyWALL 2 Plus User’s Guide	169