ZyXEL Communications 2 Plus 458

Chapter 26 Maintenance

The following table describes the labels in this screen.

Table 166 MAINTENANCE > Firmware Upload

LABEL	DESCRIPTION
File Path	Type in the location of the file you want to upload in this field or click Browse ... to find it.

Browse...	Click Browse... to find the .bin file you want to upload. Remember that you must
	decompress compressed (.zip) files before you can upload them.

Upload	Click Upload to begin the upload process. This process may take up to two minutes.

Do not turn off the ZyWALL while firmware upload is in progress!

After you see the Firmware Upload in Process screen, wait two minutes before logging into the ZyWALL again.

Figure 288 Firmware Upload In Process

The ZyWALL automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop.

Figure 289 Network Temporarily Disconnected

After two minutes, log in again and check your new firmware version in the HOME screen.

If the upload was not successful, the following screen will appear. Click Return to go back to the F/W Upload screen.

458
458	ZyWALL 2 Plus User’s Guide