Chapter 32 DMZ Setup

"DMZ, WLAN and LAN IP addresses must be on separate subnets. You must also configure NAT for the DMZ port (see Chapter 36 on page 521) in menus 15.1 and 15.2.

32.3.2IP Alias Setup

Use menu 5.2 to configure the first network. Move the cursor to the Edit IP Alias field, press [SPACE BAR] to choose Yes and press [ENTER] to open Menu 5.2.1 - IP Alias Setup, as shown next. Use this menu to configure the second and third networks.

Figure 327 Menu 5.2.1: IP Alias Setup

Menu 5.2.1 - IP Alias Setup

IP Alias 1= No

IP Address= N/A

IP Subnet Mask= N/A

RIP Direction= N/A

Version= N/A

Incoming protocol filters= N/A

Outgoing protocol filters= N/A

IP Alias 2= No

IP Address= N/A

IP Subnet Mask= N/A

RIP Direction= N/A

Version= N/A

Incoming protocol filters= N/A

Outgoing protocol filters= N/A

Enter here to CONFIRM or ESC to CANCEL:

Refer to Table 186 on page 495 for instructions on configuring IP alias parameters.

 

503

ZyWALL 2 Plus User’s Guide