Chapter 43 Remote Management
Figure 420 Menu 24.11 – Remote Management Control
Menu 24.11 | - Remote Management Control |
| |
TELNET Server: | Port = 23 | Access = | LAN |
FTP Server: | Secure Client | IP = 0.0.0.0 | LAN+WAN+DMZ+WLAN |
Port = 21 | Access = | ||
SSH Server: | Secure Client | IP = 0.0.0.0 |
|
Certificate = | auto_generated_self_signed_cert | ||
| Port = 22 | Access = | LAN+WAN+DMZ+WLAN |
HTTPS Server: | Secure Client | IP = 0.0.0.0 |
|
Certificate = | auto_generated_self_signed_cert | ||
| Authenticate Client Certificates = No | ||
| Port = 443 | Access = | LAN+WAN+DMZ+WLAN |
HTTP Server: | Secure Client | IP = 0.0.0.0 | LAN+WAN+DMZ+WLAN |
Port = 80 | Access = | ||
SNMP Service: | Secure Client | IP = 0.0.0.0 | LAN+WAN+DMZ+WLAN |
Port = 161 | Access = | ||
DNS Service: | Secure Client | IP = 0.0.0.0 | LAN+WAN+DMZ+WLAN |
Port = 53 | Access = | ||
| Secure Client | IP = 0.0.0.0 |
|
Press ENTER | to Confirm or | ESC to Cancel: | |
|
|
|
|
The following table describes the fields in this screen.
Table 219 Menu 24.11 – Remote Management Control
FIELD | DESCRIPTION |
Telnet Server | Each of these |
FTP Server | manage the ZyWALL. |
SSH Server |
|
HTTPS Server |
|
HTTP Server |
|
SNMP Service |
|
DNS Service |
|
|
|
Port | This field shows the port number for the service or protocol. You may change the |
| port number if needed, but you must use the same port number to access the |
| ZyWALL. |
|
|
Access | Select the access interface (if any) by pressing [SPACE BAR], then [ENTER] to |
| choose from: LAN, WAN, LAN+WAN, DMZ, LAN+DMZ, WAN+DMZ, |
| LAN+WAN+DMZ, WLAN, LAN+WLAN, WAN+WLAN, LAN+WAN+WLAN, |
| DMZ+WLAN, LAN+DMZ+WLAN, WAN+DMZ+WLAN, LAN+WAN+DMZ+WLAN |
| or Disable. |
Secure Client IP | The default 0.0.0.0 allows any client to use this service to remotely manage the |
| ZyWALL. Enter an IP address to restrict access to a client with a matching IP |
| address. |
|
|
Certificate | Press [SPACE BAR] and then [ENTER] to select the certificate that the ZyWALL |
| will use to identify itself. The ZyWALL is the SSL server and must always |
| authenticate itself to the SSL client (the computer which requests the HTTPS |
| connection with the ZyWALL). |
|
|
596 |
| |
ZyWALL 2 Plus User’s Guide |
| |
|
|
|