Chapter 42 System Maintenance Menus 8 to 10
The following table describes the fields in this screen.
Table 217 Call History
FIELD | DESCRIPTION |
Phone Number | The PPPoE service names are shown here. |
|
|
Dir | This shows whether the call was incoming or outgoing. |
|
|
Rate | This is the transfer rate of the call. |
|
|
#call | This is the number of calls made to or received from that telephone number. |
|
|
Max | This is the length of time of the longest telephone call. |
|
|
Min | This is the length of time of the shortest telephone call. |
|
|
Total | This is the total length of time of all the telephone calls to/from that telephone |
| number. |
|
|
You may enter an entry number to delete it or ‘”0” to exit.
42.3 Time and Date Setting
The ZyWALL’s Real Time Chip (RTC) keeps track of the time and date. There is also a software mechanism to set the time manually or get the current time and date from an external server when you turn on your ZyWALL. Menu 24.10 allows you to update the time and date settings of your ZyWALL. The real time is then displayed in the ZyWALL error logs and firewall logs.
Select menu 24 in the main menu to open Menu 24 - System Maintenance, as shown next.
Figure 418 Menu 24: System Maintenance
Menu 24 - System Maintenance
1.System Status
2.System Information and Console Port Speed
3.Log and Trace
4.Diagnostic
5.Backup Configuration
6.Restore Configuration
7.Upload Firmware
8.Command Interpreter Mode
9.Call Control
10.Time and Date Setting
11.Remote Management Setup
Enter Menu Selection Number:
Enter 10 to go to Menu 24.10 - System Maintenance - Time and Date Setting to update the time and date settings of your ZyWALL as shown in the following screen.
| 591 |
ZyWALL 2 Plus User’s Guide | |
|
|