ZyXEL Communications 2 Plus 27.3 Navigating the SMT Interface, 27.2.2 Entering the Password

Chapter 27 Introducing the SMT

Figure 298 Initial Screen

Copyright (c) 1994 - 2007 ZyXEL Communications Corp.

initialize ch =0, ethernet address: 00:A0:C5:01:23:45

initialize ch =1, ethernet address: 00:A0:C5:01:23:46

initialize ch =2, ethernet address: 00:A0:C5:01:23:47

initialize ch =3, ethernet address: 00:A0:C5:01:23:48

initialize ch =4, ethernet address: 00:00:00:00:00:00 AUX port init . done

Modem init . inactive

Press ENTER to continue...

27.2.2 Entering the Password

The login screen appears after you press [ENTER], prompting you to enter the password, as shown below.

For your first login, enter the default password “1234”. As you type the password, the screen displays an “X” for each character you type.

Please note that if there is no activity for longer than five minutes after you log in, your ZyWALL will automatically log you out and display a blank screen. If you see a blank screen, press [ENTER] to bring up the login screen again.

Figure 299 Password Screen

Enter Password : XXXX

27.3 Navigating the SMT Interface

The SMT is an interface that you use to configure your ZyWALL.

Several operations that you should be familiar with before you attempt to modify the configuration are listed in the table below.

Table 169 Main Menu Commands

OPERATION	KEYSTROKES	DESCRIPTION
Move down	[ENTER]	To move forward to a submenu, type in the number of the desired
to another		submenu and press [ENTER].
menu
Move up to a	[ESC]	Press the [ESC] key to move back to the previous menu.
previous
menu
Move to a	Press [SPACE	Fields beginning with “Edit” lead to hidden menus and have a
“hidden”	BAR] to change	default setting of No. Press [SPACE BAR] to change No to Yes,
menu	No to Yes then	and then press [ENTER] to go to a “hidden” menu.
	press [ENTER].

468
	ZyWALL 2 Plus User’s Guide