Chapter 35 IP Static Route Setup
Figure 340 Menu 12. 1: Edit IP Static Route
Menu 12.1 - Edit IP Static Route
Route #: 3
Route Name= ?
Active= No
Destination IP Address= ?
IP Subnet Mask= ?
Gateway IP Address= ?
Metric= 2
Private= No
Press ENTER to CONFIRM or ESC to CANCEL:
`The following table describes the IP Static Route Menu fields.
Table 195 Menu 12. 1: Edit IP Static Route
FIELD | DESCRIPTION |
Route # | This is the index number of the static route that you chose in menu 12. |
|
|
Route Name | Enter a descriptive name for this route. This is for identification purposes only. |
|
|
Active | This field allows you to activate/deactivate this static route. |
|
|
Destination IP | This parameter specifies the IP network address of the final destination. Routing is |
Address | always based on network number. If you need to specify a route to a single host, |
| use a subnet mask of 255.255.255.255 in the subnet mask field to force the network |
| number to be identical to the host ID. |
|
|
IP Subnet Mask | Enter the IP subnet mask for this destination. |
|
|
Gateway IP | Enter the IP address of the gateway. The gateway is an immediate neighbor of your |
Address | ZyWALL that will forward the packet to the destination. On the LAN, the gateway |
| must be a router on the same segment as your ZyWALL; over the WAN, the |
| gateway must be the IP address of one of the remote nodes. |
|
|
Metric | Enter a number from 1 to 15 to set this route’s priority among the ZyWALL’s routes |
| (see Section 8.2 on page 151). The smaller the number, the higher priority the route |
| has. |
|
|
Private | This parameter determines if the ZyWALL will include the route to this remote node |
| in its RIP broadcasts. If set to Yes, this route is kept private and not included in RIP |
| broadcast. If No, the route to this remote node will be propagated to other hosts |
| through RIP broadcasts. |
|
|
Once you have completed filling in this menu, press [ENTER] at the message “Press ENTER to Confirm…” to save your configuration, or press [ESC] to cancel.
520 |
| |
ZyWALL 2 Plus User’s Guide |
| |
|
|
|