ZyXEL Communications 2 Plus 19.12 Configuring Class Setup

Chapter 19 Bandwidth Management

Table 108 ADVANCED > BW MGMT > Summary (continued)

LABEL	DESCRIPTION
Scheduler	Select either Priority-Basedor Fairness-Basedfrom the drop-down menu to
	control the traffic flow.
	Select Priority-Basedto give preference to bandwidth classes with higher priorities.
	Select Fairness-Basedto treat all bandwidth classes equally. See Section 19.7 on
	page 353.
Maximize	Select this check box to have the ZyWALL divide up all of the interface’s unallocated
Bandwidth	and/or unused bandwidth among the bandwidth classes that require bandwidth. Do
Usage	not select this if you want to reserve bandwidth for traffic that does not match a
	bandwidth class (see Section 19.7.4 on page 353) or you want to limit the speed of
	this interface (see the Speed field description).
Apply	Click Apply to save your changes back to the ZyWALL.
Reset	Click Reset to begin configuring this screen afresh.

19.12 Configuring Class Setup

The Class Setup screen displays the configured bandwidth classes by individual interface. Select an interface and click the buttons to perform the actions described next. Click “+” to expand the class tree or click “-” to collapse the class tree. Each interface has a permanent root class. The bandwidth budget of the root class is equal to the speed you configured on the interface (see Section 19.11 on page 357 to configure the speed of the interface). Configure sub-class layers for the root class.

To add or delete child classes on an interface, click ADVANCED > BW MGMT > Class Setup. The screen is shown here with example classes.

Figure 231 ADVANCED > BW MGMT > Class Setup

358
	ZyWALL 2 Plus User’s Guide