ZyXEL Communications 2 Plus 31.1 Introduction to Internet Access Setup, 31.2 Ethernet Encapsulation

Internet Access

This chapter shows you how to configure your ZyWALL for Internet access.

31.1 Introduction to Internet Access Setup

Use information from your ISP along with the instructions in this chapter to set up your ZyWALL to access the Internet. There are three different menu 4 screens depending on whether you chose Ethernet, PPTP or PPPoE Encapsulation. Contact your ISP to determine what encapsulation type you should use.

31.2 Ethernet Encapsulation

If you choose Ethernet in menu 4 you will see the next menu.

Figure 320 Menu 4: Internet Access Setup (Ethernet)

Menu 4 - Internet Access Setup

ISP's Name= WAN_1

Encapsulation= Ethernet

Service Type= Standard

My Login= N/A

My Password= N/A

Retype to Confirm= N/A

Relogin Every (min)= N/A

IP Address Assignment= Dynamic

IP Address= N/A

IP Subnet Mask= N/A

Gateway IP Address= N/A

Network Address Translation= SUA Only

Press ENTER to Confirm or ESC to Cancel:

	497
ZyWALL 2 Plus User’s Guide	497