42

System Maintenance Menus 8 to 10

This chapter leads you through SMT menus 24.8 to 24.10.

42.1 Command Interpreter Mode

The Command Interpreter (CI) is a part of the main router firmware. The CI provides much of the same functionality as the SMT, while adding some low-level setup and diagnostic functions. Enter the CI from the SMT by selecting menu 24.8. Access can be by Telnet or by a serial connection to the console port, although some commands are only available with a serial connection. See the included disk or zyxel.com for more detailed information on CI commands. Enter 8 from Menu 24 - System Maintenance.

"Use of undocumented commands or misconfiguration can damage the unit and possibly render it unusable.

Figure 413 Command Mode in Menu 24

Menu 24 - System Maintenance

1.System Status

2.System Information and Console Port Speed

3.Log and Trace

4.Diagnostic

5.Backup Configuration

6.Restore Configuration

7.Upload Firmware

8.Command Interpreter Mode

9.Call Control

10.Time and Date Setting

11.Remote Management Setup

Enter Menu Selection Number:

 

587

ZyWALL 2 Plus User’s Guide