ZyXEL Communications 2 Plus 279

Chapter 14 IPSec VPN

Figure 182 SECURITY > VPN > VPN Rules (IKE) > Edit Network Policy > Port Forwarding

The following table describes the labels in this screen.

Table 69 SECURITY > VPN > VPN Rules (IKE) > Edit Network Policy > Port Forwarding

LABEL	DESCRIPTION
Default Server	In addition to the servers for specified services, NAT supports a default server.
	A default server receives packets from ports that are not specified in this
	screen. If you do not assign a default server IP address, all packets received for
	ports not specified in this screen are discarded.

#	Number of an individual port forwarding server entry.

Active	Select this check box to activate the port forwarding server entry.

Name	Enter a descriptive name for identifying purposes.

Start Port	Type a port number in this field.
	To forward only one port, type the port number again in the End Port field.
	To forward a series of ports, type the start port number here and the end port
	number in the End Port field.

End Port	Type a port number in this field.
	To forward only one port, type the port number in the Start Port field above and
	then type it again in this field.
	To forward a series of ports, type the last port number in a series that begins
	with the port number in the Start Port field above.

Server IP Address	Type your server IP address in this field.

Apply	Click this button to save these settings.

Reset	Click this button to begin configuring this screen afresh.

Cancel	Click this button to return to the VPN-Network Policy -Editscreen without
	saving your changes.