Chapter 40 System Information & Diagnosis

3There are three commands in Menu 24.1 - System Maintenance - Status. Entering 1 drops the WAN connection, 9 resets the counters and [ESC] takes you back to the previous screen.

Figure 384 Menu 24.1: System Maintenance: Status

 

 

Menu 24.1 - System Maintenance - Status

 

07:34:20

Port

Status

TxPkts

RxPkts

Cols

Tx B/s

Mon. Sep. 17, 2007

Rx B/s

Up Time

WAN

100M/Full

4860

17092

0

0

128

1:47:08

LAN

100M/Full

9021

10280

0

716

128

1:50:12

DMZ

100M/Full

229

0

0

0

0

1:50:12

WLAN

100M/Full

108

0

0

0

0

1:50:12

Port

Ethernet Address

IP Address

IP Mask

DHCP

WAN

00:13:49:00:00:02

172.16.1.34

255.255.255.0

Client

LAN

00:13:49:00:00:01

192.168.1.1

255.255.255.0

Server

WLAN

00:13:49:00:00:04

0.0.0.0

0.0.0.0

None

DMZ

00:13:49:00:00:03

10.2.3.4

255.0.0.0

None

System up Time:

1:50:17

 

 

 

Press Command:

COMMANDS: 1-Drop

WAN 9-Reset Counters ESC-Exit

The following table describes the fields present in Menu 24.1 - System Maintenance - Status. These fields are READ-ONLY and meant for diagnostic purposes. The upper right corner of the screen shows the time and date according to the format you set in menu 24.10.

Table 208 System Maintenance: Status Menu Fields

FIELD

DESCRIPTION

Port

This field identifies a port (WAN, LAN, DMZ or WLAN) on the ZyWALL.

 

 

Status

For the LAN, DMZ, and WLAN Interfaces, this displays the port speed and duplex

 

setting.

 

For the WAN port, it displays the port speed and duplex setting if you’re using

 

Ethernet encapsulation and Down (line is down or not connected), Idle (line (ppp)

 

idle), Dial (starting to trigger a call) or Drop (dropping a call) if you’re using

 

PPPoE encapsulation.

 

 

TxPkts

This is the number of transmitted packets on this port.

 

 

RxPkts

This is the number of received packets on this port.

 

 

Cols

This is the number of collisions on this port.

 

 

Tx B/s

This field shows the transmission speed in Bytes per second on this port.

 

 

Rx B/s

This field shows the reception speed in Bytes per second on this port.

 

 

Up Time

This is the total amount of time the line has been up.

 

 

Ethernet Address

This is the MAC address of the port listed on the left.

 

 

IP Address

This is the IP address of the port listed on the left.

 

 

IP Mask

This is the IP mask of the port listed on the left.

 

 

DHCP

This is the DHCP setting of the port listed on the left.

 

 

560

 

ZyWALL 2 Plus User’s Guide