Chapter 36 Network Address Translation (NAT)
Table 199 Menu 15.1.1.1: Editing/Configuring an Individual Rule in a Set
FIELD | DESCRIPTION |
Start | Enter the starting global IP address (IGA). If you have a dynamic IP, enter 0.0.0.0 as the |
| Global IP Start. Note that Global IP Start can be set to 0.0.0.0 only if the types are Many- |
| |
|
|
End | Enter the ending global IP address (IGA). This field is N/A for |
| and Server types. |
|
|
Once you have finished configuring a rule in this menu, press [ENTER] at the message “Press ENTER to Confirm…” to save your configuration, or press [ESC] to cancel.
36.3Configuring a Server behind NAT
"If you do not assign a Default Server IP address, the ZyWALL discards all packets received for ports that are not specified here or in the remote management setup.
Follow these steps to configure a server behind NAT:
1Enter 15 in the main menu to go to Menu 15 - NAT Setup.
2Enter 2 to open menu 15.2 and configure the address mapping rules for the WAN port.
Figure 348 Menu 15.2: NAT Server Sets
Menu 15.2 - NAT Server Setup |
|
Default Server: 0.0.0.0 | IP Address |
Rule Act. Start Port End Port |
001 | No | 0 | 0 | 0.0.0.0 |
002 | No | 0 | 0 | 0.0.0.0 |
003 | No | 0 | 0 | 0.0.0.0 |
004 | No | 0 | 0 | 0.0.0.0 |
005 | No | 0 | 0 | 0.0.0.0 |
006 | No | 0 | 0 | 0.0.0.0 |
007 | No | 0 | 0 | 0.0.0.0 |
008 | No | 0 | 0 | 0.0.0.0 |
009 | No | 0 | 0 | 0.0.0.0 |
010 | No | 0 | 0 | 0.0.0.0 |
Select Command= None |
| Select Rule= N/A | ||
| Press ENTER to Confirm or ESC to Cancel: | |||
3Select Edit Rule in the Select Command field; type the index number of the NAT server you want to configure in the Select Rule field and press [ENTER] to open Menu 15.2.x - NAT Server Configuration (see the next figure).
528 |
| |
ZyWALL 2 Plus User’s Guide |
| |
|
|
|