ZyXEL Communications 2 Plus 39.1 SNMP Configuration

SNMP Configuration

This chapter explains SNMP configuration menu 22.

39.1 SNMP Configuration

To configure SNMP, enter 22 from the main menu to display Menu 22 - SNMP Configuration as shown next. The “community” for Get, Set and Trap fields is SNMP terminology for password.

Figure 382 Menu 22: SNMP Configuration

Menu 22 - SNMP Configuration

SNMP:

Get Community= public

Set Community= public

Trusted Host= 0.0.0.0

Trap:

Community= public

Destination= 0.0.0.0

Press ENTER to Confirm or ESC to Cancel:

The following table describes the SNMP configuration parameters.

Table 206 SNMP Configuration Menu Fields

FIELD	DESCRIPTION
Get Community	Type the Get community, which is the password for the incoming Get- and GetNext
	requests from the management station.

Set Community	Type the Set community, which is the password for incoming Set requests from the
	management station.

Trusted Host	If you enter a trusted host, your ZyWALL will only respond to SNMP messages from
	this address. A blank (default) field means your ZyWALL will respond to all SNMP
	messages it receives, regardless of source.

Trap

Community	Type the Trap community, which is the password sent with each trap to the SNMP
	manager.

	557
ZyWALL 2 Plus User’s Guide	557