Chapter 41 Firmware and Configuration File Maintenance
4After a successful backup you will see the following screen. Press any key to return to the SMT menu.
Figure 399 Successful Backup Confirmation Screen
**Backup Configuration completed. OK.
### Hit any key to continue.###
41.4Restore Configuration
This section shows you how to restore a previously saved configuration. Note that this function erases the current configuration before restoring a previous back up configuration; please do not attempt to restore unless you have a backup configuration file stored on disk.
FTP is the preferred method for restoring your current computer configuration to your ZyWALL since FTP is faster. Please note that you must wait for the system to automatically restart after the file transfer is complete.
"WARNING!
Do not interrupt the file transfer process as this may PERMANENTLY DAMAGE YOUR ZyWALL. When the Restore Configuration process is complete, the ZyWALL will automatically restart.
41.4.1Restore Using FTP
For details about backup using (T)FTP please refer to earlier sections on FTP and TFTP file upload in this chapter.
| 577 |
ZyWALL 2 Plus User’s Guide | |
|
|