ZyXEL Communications 2 Plus 426

Chapter 25 Logs Screens

Figure 275 LOGS > Reports

"Enabling the ZyWALL’s reporting function decreases the overall throughput by about 1 Mbps.

The following table describes the labels in this screen.

Table 135 LOGS > Reports

LABEL	DESCRIPTION
Collect	Select the check box and click Apply to have the ZyWALL record report data.
Statistics

Send Raw	Select the check box and click Apply to have the ZyWALL send unprocessed traffic
Traffic Statistics	statistics to a syslog server for analysis.
to Syslog	You must have the syslog server already configured in the Log Settings screen.
Server for
Analysis

Apply	Click Apply to save your changes to the ZyWALL.

Reset	Click Reset to begin configuring this screen afresh.

Interface	Select on which interface (LAN, DMZ or WLAN) the logs will be collected. The logs
	on the DMZ, LAN or WLAN IP alias 1 and 2 are also recorded.

Report Type	Use the drop-down list box to select the type of reports to display.
	Web Site Hits displays the web sites that have been visited the most often from the
	LAN and how many times they have been visited.
	Protocol/Port displays the protocols or service ports that have been used the most
	and the amount of traffic for the most used protocols or service ports.
	Host IP Address displays the LAN, DMZ or WLAN IP addresses to and /or from
	which the most traffic has been sent and how much traffic has been sent to and from
	those IP addresses.

Refresh	Click Refresh to update the report display. The report also refreshes automatically
	when you close and reopen the screen.

Flush	Click Flush to discard the old report data and update the report display.