Chapter 21 Remote Management
Figure 262 ADVANCED > REMOTE MGMT > SNMP
The following table describes the labels in this screen.
Table 125 ADVANCED > REMOTE MGMT > SNMP
LABEL | DESCRIPTION |
SNMP |
|
Configuration |
|
|
|
Get Community | Enter the Get Community, which is the password for the incoming Get and |
| GetNext requests from the management station. The default is public and allows all |
| requests. |
|
|
Set Community | Enter the Set community, which is the password for incoming Set requests from |
| the management station. The default is public and allows all requests. |
|
|
Trap |
|
|
|
Community | Type the trap community, which is the password sent with each trap to the SNMP |
| manager. The default is public and allows all requests. |
|
|
Destination | Type the IP address of the station to send your SNMP traps to. |
|
|
SNMP |
|
|
|
Service Port | You may change the server port number for a service if needed, however you must |
| use the same port number in order to use that service for remote management. |
|
|
Service Access | Select the interface(s) through which a computer may access the ZyWALL using |
| this service. |
|
|
Secure Client IP | A secure client is a “trusted” computer that is allowed to communicate with the |
Address | ZyWALL using this service. |
| Select All to allow any computer to access the ZyWALL using this service. |
| Choose Selected to just allow the computer with the IP address that you specify to |
| access the ZyWALL using this service. |
|
|
Apply | Click Apply to save your customized settings. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
394 |
| |
ZyWALL 2 Plus User’s Guide |
| |
|
|
|