ZyXEL Communications 2 Plus 27.3.1 Main Menu

		Chapter 27 Introducing the SMT
Table 169 Main Menu Commands
OPERATION	KEYSTROKES	DESCRIPTION
Move the	[ENTER] or [UP]/	Within a menu, press [ENTER] to move to the next field. You can
cursor	[DOWN] arrow	also use the [UP]/[DOWN] arrow keys to move to the previous and
	keys	the next field, respectively.
		When you are at the top of a menu, press the [UP] arrow key to
		move to the bottom of a menu.

Entering	Fill in, or press	You need to fill in two types of fields. The first requires you to type
information	[SPACE BAR],	in the appropriate information. The second allows you to cycle
	then press	through the available choices by pressing [SPACE BAR].
	[ENTER] to select
	from choices.

Required	<? >	All fields with the symbol <?> must be filled in order be able to
fields		save the new configuration.

N/A fields	<N/A>	Some of the fields in the SMT will show a <N/A>. This symbol
		refers to an option that is Not Applicable.

Save your	[ENTER]	Save your configuration by pressing [ENTER] at the message
configuration		“Press ENTER to confirm or ESC to cancel”. Saving the data on
		the screen will take you, in most cases to the previous menu.
		Make sure you save your settings in each screen that you
		configure.

Exit the SMT	Type 99, then	Type 99 at the main menu prompt and press [ENTER] to exit the
	press [ENTER].	SMT interface.

27.3.1 Main Menu

After you enter the password, the SMT displays the ZyWALL Main Menu, as shown next.

Figure 300 Main Menu (Router Mode)

Enter Menu Selection Number: