ZyXEL Communications 2 Plus 26.4 Time and Date

Chapter 26 Maintenance

Figure 280 MAINTENANCE > Password

The following table describes the labels in this screen.

Table 161 MAINTENANCE > Password

LABEL	DESCRIPTION
Old Password	Type the default password or the existing password you use to access the system
	in this field. If you forget the password, you may have to use the hardware RESET
	button. This restores the default password of 1234.

New Password	Type your new system password (up to 30 characters). Note that as you type a
	password, the screen displays a (*) for each character you type.

Retype to Confirm	Type the new password again for confirmation.

Apply	Click Apply to save your changes back to the ZyWALL.

Reset	Click Reset to begin configuring this screen afresh.

26.4 Time and Date

The ZyWALL’s Real Time Chip (RTC) keeps track of the time and date. There is also a software mechanism to set the time manually or get the current time and date from an external server when you turn on your ZyWALL.

To change your ZyWALL’s time and date, click MAINTENANCE > Time and Date. The screen appears as shown. Use this screen to configure the ZyWALL’s time based on your local time zone.

	449
ZyWALL 2 Plus User’s Guide	449