Chapter 30 LAN Setup
Figure 318 Menu 3.2: TCP/IP and DHCP Ethernet Setup
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP= Server | TCP/IP Setup: | |
Client IP | Pool: | IP Address= 192.168.1.1 |
Starting Address= 192.168.1.33 | ||
Size of | Client IP Pool= 128 | IP Subnet Mask= 255.255.255.0 |
First DNS | Server= From ISP | RIP Direction= Both |
IP Address= N/A | Version= | |
Second DNS Server= From ISP | Multicast= None | |
IP Address= N/A | Edit IP Alias= No | |
Third DNS | Server= From ISP |
|
IP Address= N/A
DHCP Server Address= N/A
Press ENTER to Confirm or ESC to Cancel:
Follow the instructions in the next table on how to configure the DHCP fields.
Table 184 Menu 3.2: DHCP Ethernet Setup Fields
FIELD | DESCRIPTION |
DHCP | This field enables or disables the DHCP server. |
| If set to Server, your ZyWALL will act as a DHCP server. |
| If set to None, the DHCP server will be disabled. |
| If set to Relay, the ZyWALL acts as a surrogate DHCP server and relays requests |
| and responses between the remote server and the clients. |
| When set to Server, the following items need to be set: |
|
|
Client IP Pool: |
|
|
|
Starting Address | This field specifies the first of the contiguous addresses in the IP address pool. |
|
|
Size of Client IP | This field specifies the size, or count of the IP address pool. |
Pool |
|
|
|
| 493 |
ZyWALL 2 Plus User’s Guide | |
|
|