43
Remote Management
This chapter covers remote management found in SMT menu 24.11.
43.1 Remote Management
Remote management allows you to determine which services/protocols can access which ZyWALL interface (if any) from which computers.
"When you configure remote management to allow management from any network except the LAN, you still need to configure a firewall rule to allow access. See Chapter 11 on page 191 for details on configuring firewall rules.
You can also disable a service on the ZyWALL by not allowing access for the service/protocol through any of the ZyWALL interfaces.
To disable remote management of a service, select Disable in the corresponding Access field. Enter 11 from menu 24 to bring up Menu 24.11 - Remote Management Control.
| 595 |
ZyWALL 2 Plus User’s Guide | |
|
|