Chapter 41 Firmware and Configuration File Maintenance

41.3.3 Example of FTP Commands from the Command Line

Figure 395 FTP Session Example

331 Enter PASS command Password:

230 Logged in ftp> bin

200 Type I OK

ftp> get rom-0 zyxel.rom 200 Port command okay

150 Opening data connection for STOR ras

226 File received OK

ftp: 16384 bytes sent in 1.10Seconds 297.89Kbytes/sec.

ftp> quit

41.3.4 GUI-based FTP Clients

The following table describes some of the commands that you may see in GUI-based FTP clients.

Table 213 General Commands for GUI-based FTP Clients

COMMAND

DESCRIPTION

Host Address

Enter the address of the host server.

 

 

Login Type

Anonymous.

 

This is when a user I.D. and password is automatically supplied to the server

 

for anonymous access. Anonymous logins will work only if your ISP or

 

service administrator has enabled this option.

 

Normal.

 

The server requires a unique User ID and Password to login.

 

 

Transfer Type

Transfer files in either ASCII (plain text format) or in binary mode.

 

Configuration and firmware files should be transferred in binary mode

 

 

Initial Remote Directory

Specify the default remote directory (path).

 

 

Initial Local Directory

Specify the default local directory (path).

 

 

41.3.5 File Maintenance Over WAN

TFTP, FTP and Telnet over the WAN will not work when:

1The firewall is active (turn the firewall off in menu 21.2 or create a firewall rule to allow access from the WAN).

2You have disabled Telnet service in menu 24.11.

3You have applied a filter in menu 3.1 (LAN) or in menu 11.5 (WAN) to block Telnet service.

4The IP you entered in the Secured Client IP field in menu 24.11 does not match the client IP. If it does not match, the ZyWALL will disconnect the Telnet session immediately.

5You have an SMT console session running.

574

 

ZyWALL 2 Plus User’s Guide