Chapter 41 Firmware and Configuration File Maintenance
41.4.3 Restore Via Console Port
Restore configuration via console port by following the HyperTerminal procedure shown next. Procedures using other serial communications programs should be similar.
1Display menu 24.6 and enter “y” at the following screen.
Figure 402 System Maintenance: Restore Configuration
Ready to restore Configuration via Xmodem.
Do you want to continue (y/n):
2The following screen indicates that the Xmodem download has started.
Figure 403 System Maintenance: Starting Xmodem Download Screen
Starting XMODEM download (CRC mode) ...CCCCCCCCC
3Run the HyperTerminal program by clicking Transfer, then Send File as shown in the following screen.
Figure 404 Restore Configuration Example
Type the configuration file’s location,
or click Browse to search for it.
Choose the Xmodem protocol.
Then click Send.
4After a successful restoration you will see the following screen. Press any key to restart the ZyWALL and return to the SMT menu.
Figure 405 Successful Restoration Confirmation Screen
Save to ROM
Hit any key to start system reboot.
41.5 Uploading Firmware and Configuration Files
This section shows you how to upload firmware and configuration files. You can upload configuration files by following the procedure in Section 41.4 on page 577 or by following the instructions in Menu 24.7.2 - System Maintenance - Upload System Configuration File (for console port).
| 579 |
ZyWALL 2 Plus User’s Guide | |
|
|