Chapter 16 Authentication Server
16.3 RADIUS
Click SECURITY > AUTH SERVER > RADIUS to open the RADIUS screen. Configure this screen to use an external RADIUS server to authenticate users.
Figure 214 SECURITY > AUTH SERVER > RADIUS
The following table describes the labels in this screen.
Table 92 SECURITY > AUTH SERVER > RADIUS
LABEL | DESCRIPTION |
Authentication Server |
|
|
|
Active | Select the check box to enable user authentication through an external |
| authentication server. |
| Clear the check box to enable user authentication using the local user profile |
| on the ZyWALL. |
|
|
Server IP Address | Enter the IP address of the external authentication server in dotted decimal |
| notation. |
|
|
Port Number | The default port of the RADIUS server for authentication is 1812. |
| You need not change this value unless your network administrator instructs |
| you to do so with additional information. |
|
|
Key | Enter a password (up to 31 alphanumeric characters) as the key to be shared |
| between the external authentication server and the ZyWALL. |
| The key is not sent over the network. This key must be the same on the |
| external authentication server and ZyWALL. |
|
|
Accounting Server |
|
|
|
Active | Select the check box to enable user accounting through an external |
| authentication server. |
|
|
Server IP Address | Enter the IP address of the external accounting server in dotted decimal |
| notation. |
|
|
Port Number | The default port of the RADIUS server for accounting is 1813. |
| You need not change this value unless your network administrator instructs |
| you to do so with additional information. |
|
|
326 |
| |
ZyWALL 2 Plus User’s Guide |
| |
|
|
|