|
| Chapter 34 Remote Node Setup |
| Table 190 Menu 11.1: Remote Node Profile for Ethernet Encapsulation (continued) | |
| FIELD | DESCRIPTION |
| Server | This field is valid only when RoadRunner is selected in the Service Type field. The |
|
| ZyWALL will find the RoadRunner Server IP automatically if this field is left blank. If |
|
| it does not, then you must enter the authentication server IP address here. |
|
|
|
| Relogin Every | This field is available when you select Telia Login in the Service Type field. |
| (min) | The Telia server logs the ZyWALL out if the ZyWALL does not log in periodically. |
|
| Type the number of minutes from 1 to 59 (30 recommended) for the ZyWALL to wait |
|
| between logins. |
|
|
|
| Route | This field refers to the protocol that will be routed by your ZyWALL – IP is the only |
|
| option for the ZyWALL. |
|
|
|
| Edit IP | This field leads to a “hidden” menu. Press [SPACE BAR] to select Yes and press |
|
| [ENTER] to go to Menu 11.1.2 - Remote Node Network Layer Options. |
| Session Options |
|
|
|
|
| Schedules | You can apply up to four schedule sets here. For more details please refer to |
|
| |
|
|
|
| Edit Filter Sets | This field leads to another “hidden” menu. Use [SPACE BAR] to select Yes and |
|
| press [ENTER] to open menu 11.x.4 to edit the filter sets. See Section 34.5 on page |
|
| 516 for more details. |
|
|
|
| Edit Traffic | Press [SPACE BAR] to select Yes or No. |
| Redirect | Select No (default) if you do not want to configure this feature. Select Yes and press |
|
| [ENTER] to configure Menu 11.1.5 - Traffic Redirect Setup. |
|
|
|
| Once you have configured this menu, press [ENTER] at the message “Press ENTER to Confirm...” to | |
| save your configuration, or press [ESC] at any time to cancel. | |
|
|
|
The ZyWALL supports PPPoE
| 511 |
ZyWALL 2 Plus User’s Guide | |
|
|