Chapter 44 Call Scheduling

 

Table 220 Schedule Set Setup (continued)

 

FIELD

DESCRIPTION

 

 

Day

If you selected Weekly in the How Often field above, then select the day(s) when the

 

 

 

set should activate (and recur) by going to that day(s) and pressing [SPACE BAR] to

 

 

select Yes, then press [ENTER].

 

 

 

 

 

Start Time

Enter the start time when you wish the schedule set to take effect in hour-minute format.

 

 

 

 

 

Duration

The duration determines how long the ZyWALL is to apply the action configured in the

 

 

Action field. Enter the maximum length of time in hour-minute format.

 

 

 

 

 

Action

Forced On means that the connection is maintained whether or not there is a demand

 

 

call on the line and will persist for the time period specified in the Duration field.

 

 

Forced Down means that the connection is blocked whether or not there is a demand

 

 

call on the line.

 

 

Enable Dial-On-Demandmeans that this schedule permits a demand call on the line.

 

 

Disable Dial-On-Demandmeans that this schedule prevents a demand call on the line.

 

 

 

 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your configuration, or press [ESC] at any time to cancel.

Once your schedule sets are configured, you must then apply them to the desired remote node(s). Enter 11 from the Main Menu and then enter the target remote node index. Press [SPACE BAR] and then [ENTER] to select PPPoE in the Encapsulation field to make the schedule sets field available as shown next.

Figure 423 Applying Schedule Set(s) to a Remote Node (PPPoE)

Menu 11.1 - Remote Node Profile

Rem Node Name= ChangeMe

Route= IP

Active= Yes

 

Encapsulation= PPPoE

Edit IP= No

Service Type= Standard

Telco Option:

Service Name=

Allocated Budget(min)= 0

Outgoing=

Period(hr)= 0

My Login=

Schedules= 1,2,3,4

My Password= ********

Nailed-Up Connection= No

Authen= CHAP/PAP

Session Options:

 

Edit Filter Sets= No

Idle Timeout(sec)= 100

Edit Traffic Redirect= No

Press ENTER to Confirm or ESC to Cancel:

You can apply up to four schedule sets, separated by commas, for one remote node. Change the schedule set numbers to your preference(s).

 

601

ZyWALL 2 Plus User’s Guide