Chapter 17 Network Address Translation (NAT)
Figure 225 ADVANCED > NAT > Port Triggering
The following table describes the labels in this screen.
Table 99 ADVANCED > NAT > Port Triggering
LABEL | DESCRIPTION |
# | This is the rule index number |
|
|
Name | Type a unique name (up to 15 characters) for identification purposes. All characters |
| are permitted - including spaces. |
|
|
Incoming | Incoming is a port (or a range of ports) that a server on the WAN uses when it sends |
| out a particular service. The ZyWALL forwards the traffic with this port (or range of |
| ports) to the client computer on the LAN that requested the service. |
|
|
Start Port | Type a port number or the starting port number in a range of port numbers. |
|
|
End Port | Type a port number or the ending port number in a range of port numbers. |
|
|
Trigger | The trigger port is a port (or a range of ports) that causes (or triggers) the ZyWALL to |
| record the IP address of the LAN computer that sent the traffic to a server on the WAN. |
|
|
Start Port | Type a port number or the starting port number in a range of port numbers. |
|
|
End Port | Type a port number or the ending port number in a range of port numbers. |
|
|
Apply | Click Apply to save your changes back to the ZyWALL. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
| 345 |
ZyWALL 2 Plus User’s Guide | |
|
|