ZyXEL Communications 2 Plus 26.3 Configuring Password

Chapter 26 Maintenance

Figure 279 MAINTENANCE > General Setup

The following table describes the labels in this screen.

Table 160 MAINTENANCE > General Setup

LABEL	DESCRIPTION
General Setup

System Name	Choose a descriptive name for identification purposes. It is recommended you enter
	your computer’s “Computer name” in this field. This name can be up to 30
	alphanumeric characters long. Spaces are not allowed, but dashes “-” and
	underscores "_" are accepted.

Domain Name	The Domain Name entry is what is propagated to the DHCP clients on the LAN. If
	you leave this blank, the domain name obtained by DHCP from the ISP is used.
	While you must enter the host name (System Name), the domain name can be
	assigned from the ZyWALL via DHCP.
	Enter the domain name (if you know it) here. If you leave this field blank, the ISP
	may assign a domain name via DHCP.
	The domain name entered by you is given priority over the ISP assigned domain
	name.

Administrator	Type how many minutes a management session (either via the web configurator or
Inactivity Timer	SMT) can be left idle before the session times out. The default is 5 minutes. After it
	times out you have to log in with your password again. Very long idle timeouts may
	have security risks. A value of "0" means a management session never times out,
	no matter how long it has been left idle (not recommended).

Apply	Click Apply to save your changes back to the ZyWALL.

Reset	Click Reset to begin configuring this screen afresh.

Click MAINTENANCE > Password to open the following screen. Use this screen to change the ZyWALL’s management password.