Chapter 34 Remote Node Setup

Figure 334 Menu 11.1: Remote Node Profile for PPTP Encapsulation

Menu 11.1 - Remote Node Profile

Rem Node Name= ChangeMe

Route= IP

Active= Yes

Bridge= No

Encapsulation= PPTP

Edit IP= No

Service Type= Standard

Telco Option:

Service Name= N/A

Allocated Budget(min)= 0

Outgoing:

Period(hr)= 0

My Login= 12356598@hinet.net

Schedules=

My Password= ********

Nailed-Up Connection= No

Retype to Confirm= ********

 

Authen= CHAP/PAP

Session Options:

PPTP:

My IP Addr=

Edit Filter Sets= No

My IP Mask=

Idle Timeout(sec)= 100

Server IP Addr=

Edit Traffic Redirect= No

Connection ID/Name=

Press ENTER to Confirm or ESC to Cancel:

The next table shows how to configure fields in menu 11.1 not previously discussed.

Table 192 Menu 11.1: Remote Node Profile for PPTP Encapsulation

FIELD

DESCRIPTION

Encapsulation

Press [SPACE BAR] and then [ENTER] to select PPTP. You must also go to menu

 

11.3 to check the IP Address setting once you have selected the encapsulation

 

method.

 

 

My IP Addr

Enter the IP address of the WAN Ethernet port.

 

 

My IP Mask

Enter the subnet mask of the WAN Ethernet port.

 

 

Server IP Addr

Enter the IP address of the ANT modem.

 

 

Connection ID/

Enter the connection ID or connection name in the ANT. It must follow the “c:id” and

Name

“n:name” format.

 

This field is optional and depends on the requirements of your DSL modem.

 

 

Schedules

You can apply up to four schedule sets here. For more details refer to Chapter 44

 

on page 599.

 

 

Nailed-Up

Press [SPACE BAR] and then [ENTER] to select Yes if you want to make the

Connections

connection to this remote node a nailed-up connection.

 

 

34.4 Edit IP

Move the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes. Press [ENTER] to open Menu 11.1.2 - Remote Node Network Layer Options. Not all fields are available on all models.

514

 

ZyWALL 2 Plus User’s Guide