Chapter 43 Remote Management

 

Table 219 Menu 24.11 – Remote Management Control (continued)

 

FIELD

DESCRIPTION

 

Authenticate

Select Yes by pressing [SPACE BAR], then [ENTER] to require the SSL client to

 

Client

authenticate itself to the ZyWALL by sending the ZyWALL a certificate. To do that

 

Certificates

the SSL client must have a CA-signed certificate from a CA that has been imported

 

 

as a trusted CA on the ZyWALL (see Appendix E on page 657 for details).

 

 

 

Once you have filled in this menu, press [ENTER] at the message "Press ENTER to Confirm or ESC to Cancel" to save your configuration, or press [ESC] to cancel.

43.1.1 Remote Management Limitations

Remote management over LAN or WAN will not work when:

1A filter in menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet, FTP or Web service.

2You have disabled that service in menu 24.11.

3The IP address in the Secure Client IP field (menu 24.11) does not match the client IP address. If it does not match, the ZyWALL will disconnect the session immediately.

4There is an SMT console session running.

5There is already another remote management session with an equal or higher priority running. You may only have one remote management session running at one time.

6There is a firewall rule that blocks it.

 

597

ZyWALL 2 Plus User’s Guide