Chapter 25 Logs Screens
Table 145 ICMP Logs (continued)
LOG MESSAGE | DESCRIPTION |
Packet without a NAT table entry | The router blocked a packet that didn’t have a |
blocked: ICMP | corresponding NAT table entry. |
The firewall does not support this kind of ICMP packets | |
ICMP | or the ICMP packets are out of order. |
Router reply ICMP packet: ICMP | The router sent an ICMP reply packet to the sender. |
Table 146 CDR Logs |
|
LOG MESSAGE | DESCRIPTION |
board %d line %d channel %d, | The router received the setup requirements for a call. “call” is |
call %d, %s C01 Outgoing Call | the reference (count) number of the call. “dev” is the device |
dev=%x ch=%x %s | type (3 is for |
| "channel" or “ch” is the call channel ID. For example,"board 0 |
| line 0 channel 0, call 3, C01 Outgoing Call dev=6 ch=0 |
| "Means the router has dialed to the PPPoE server 3 times. |
|
|
board %d line %d channel %d, | The PPPoE, PPTP or |
call %d, %s C02 OutCall |
|
Connected %d %s |
|
board %d line %d channel %d, | The PPPoE, PPTP or |
call %d, %s C02 Call |
|
Terminated |
|
Table 147 PPP Logs
LOG MESSAGE | DESCRIPTION |
ppp:LCP Starting | The PPP connection’s Link Control Protocol stage has started. |
ppp:LCP Opening | The PPP connection’s Link Control Protocol stage is opening. |
ppp:CHAP Opening | The PPP connection’s Challenge Handshake Authentication Protocol stage is |
| opening. |
ppp:IPCP | The PPP connection’s Internet Protocol Control Protocol stage is starting. |
Starting |
|
ppp:IPCP Opening | The PPP connection’s Internet Protocol Control Protocol stage is opening. |
ppp:LCP Closing | The PPP connection’s Link Control Protocol stage is closing. |
ppp:IPCP Closing | The PPP connection’s Internet Protocol Control Protocol stage is closing. |
Table 148 UPnP Logs
LOG MESSAGE | DESCRIPTION |
UPnP pass through Firewall | UPnP packets can pass through the firewall. |
434 |
| |
ZyWALL 2 Plus User’s Guide |
| |
|
|
|