Chapter 11 Bandwidth Control
Figure 39 Bandwidth Control
The following table describes the related labels in this screen.
Table 28 Bandwidth Control
LABEL | DESCRIPTION |
Active | Select this check box to enable bandwidth control on the switch. |
|
|
Port | This field displays the port number. |
|
|
Active | Make sure to select this check box to activate your rule. You may temporarily |
| deactivate a rule without deleting it by deselecting this check box. |
|
|
Ingress Rate |
|
|
|
Commit Rate | Specify the guaranteed bandwidth allowed in kilobits per second (Kbps) for the |
| incoming traffic flow on a port. The commit rate should be less than the peak rate. |
| The sum of commit rates cannot be greater than or equal to the uplink bandwidth. |
|
|
Peak Rate | Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the |
| incoming traffic flow on a port. |
|
|
Egress Rate | Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the out- |
| going traffic flow on a port. Enter a number between 1000 and 1000 000. |
|
|
Apply | Click Apply to save the settings. |
|
|
Cancel | Click Cancel to reset the fields to your previous configuration. |
|
|
108 |
| |
| ||
|
|
|