Chapter 6 Basic Setting
Figure 23 Port Setup
The following table describes the labels in this screen.
Table 13 Port Setup
LABEL | DESCRIPTION |
Ports 1 .. 16 |
|
|
|
Port | This is the port index number. |
|
|
Active | Select this check box to enable a port. The factory default for all ports is enabled. A |
| port must be enabled for data transmission to occur. |
|
|
Name | Enter a descriptive name that identifies this port. You can enter up to 64 alpha- |
| numerical characters. |
| Note: Due to space limitation, the port name may be truncated in |
| some web configurator screens. |
|
|
Type | This field displays VDSL for the VDSL ports. |
|
|
Profile | Select a VDSL line profile from the |
| This field displays the profile names you configure in the VDSL Profile Setup screen. |
| Refer to Section 6.9 on page 77 for more information. |
|
|
PSD Profile | Select a VDSL PSD profile from the |
| This field displays the profile names you configure in the VDSL PSD Profile Setup |
| screen. Refer to Section 6.11 on page 82 for more information. |
|
|
Alarm Profile | Select a VDSL alarm profile from the |
| This field displays the alarm profile names you configure in the VDSL Alarm Profile |
| Setup screen. Refer to Section 6.10 on page 80 fore more information. |
| 73 |
|
|