Chapter 33 Command Examples
This command displays a summary list of VDSL profiles or displays the settings of a VDSL profile. The following example shows the summary table.
sysname# show |
|
|
Name | Payload Rate SNR Margin | Applied Ports |
===========================================================================
DEFVAL | 104M/104M | 6/6 | |
test | 104M/104M | 6/6 |
|
sysname#
The following example shows the settings of the test VDSL profile.
sysname# show |
| ||
Profile Name: test | Downstream | Upstream | |
| |||
+ | |||
Slow Channel Payload Rate | MAX: 104960 MIN: 64 | ||
Fast Channel Payload Rate | MAX: 104960 MIN: 64 | MAX: 104960 MIN: 64 | |
Rate Adaption | adaptAtInit | adaptAtInit | |
Max SNR Margin | 31dB | 31dB | |
Target SNR Margin | 6dB | 6dB | |
Min SNR Margin | 0dB | 0dB | |
Max Interleave Delay | 2ms | 2ms | |
Max Aggregate Power | 14dBm | 14dBm | |
Rate Raio | 0% | 0% | |
Impulse Noise Protection | 0ms | 0ms | |
FEC Redundancy | 0% | 0% | |
PSD Template Mask | templateMask2 | templateMask2 | |
PBO Control | disabled | disabled | |
PBO Level | 0dB | 0dB | |
Band Plan | bandPlan998 |
| |
Deployment Scenario | fttEx |
| |
Compatible Mode | none |
| |
Applicable Standard | etsi |
| |
Ham Band Mask | 0kHz |
| |
Custom Notch1 Start |
| ||
Custom Notch1 Stop | 0kHz |
| |
Custom Notch2 Start | 0kHz |
| |
Custom Notch2 Stop | 0kHz |
| |
Optional Band | unused |
| |
Line Type | fastOrInterleaved |
| |
sysname# |
|
|
|
33.3 ping
Syntax:
ping <ip> <
| 247 |
|
|