Chapter 33 Command Examples

An example is shown next.

Enable ports one, three, four and five for configuration.

Set the BPDU control to tunnel, to forward BPDUs received on ports one, three, four and five.

sysname(config)# interface port-channel 1,3-5 sysname(config-interface)# bpdu-control tunnel sysname(config-interface)#

33.9.3 broadcast-limit

Syntax:

broadcast-limit broadcast-limit <pkt/s>

where

 

Enables broadcast storm control limit on the switch.

<pkt/s>

Sets how many broadcast packets the interface receives per second.

An example is shown next.

Enable port one for configuration.

Enable broadcast control.

Set the number of broadband packets the interface receives per second.

sysname(config)# interface port-channel 1 sysname(config-interface)# broadcast-limit sysname(config-interface)# broadcast-limit 21

33.9.4 bandwidth-limit

Syntax:

bandwidth-limit bandwidth-limit egress <Kbps> bandwidth-limit ingress <Kbps>

where

<Kbps>

Enables bandwidth control on the switch.

 

) or

Sets the maximum bandwidth allowed for outgoing traffic (

egress

 

incoming traffic (ingress) on the switch.

 

 

 

 

An example is shown next.

Enable port one for configuration.

Enable bandwidth control.

Set the outgoing traffic bandwidth limit to 7Mbps.

254

 

VES-1616F-3x Series User’s Guide