Chapter 5 System Status and Port Statistics

The following table describes the labels in this screen.

Table 6 Status

LABEL

DESCRIPTION

System up

This field shows how long the system has been running since the last time it was

Time

started.

 

 

The following fields are related to the VDSL ports.

 

 

Port

This identifies the VDSL port. Click a port number to display the VDSL Port Details

 

screen.

 

 

PayLoad Rate

This field displays the upstream and downstream payload rates.

 

 

State

This field shows whether the port is connected (Showtime), not enabled (Idle) or is

 

negotiating a connection (Training).

 

 

Tx KB/s

This field shows the number of kilobytes per second transmitted on this port.

 

 

Rx KB/s

This field shows the number of kilobytes per second received on this port.

 

 

Up Time

This field shows the total amount of time in hours, minutes and seconds the port has

 

been up.

 

 

Retrain

Click Retrain to re-establish the line connection.

 

 

The following fields are related to the Ethernet ports.

 

 

Port

This identifies the port. Click a port number to display the Port Details screen.

 

 

Link

This field displays the speed (10M for 10Mbps, 100M for 100Mbps or 1000M for

 

1000Mbps) and the duplex (F for full duplex or H for half duplex).

 

 

State

This field displays the STP state of the port. See the Spanning Tree Protocol chapter

 

for details on STP port states.

 

 

LACP

This fields displays whether the Link Aggregation Control Protocol (LACP) has been

 

enabled on the port.

 

 

TxPkts

This field shows the number of transmitted frames on this port.

 

 

RxPkts

This field shows the number of received frames on this port.

 

 

Errors

This field shows the number of received errors on this port.

 

 

Tx KB/s

This field shows the number of kilobytes per second transmitted on this port.

 

 

Rx KB/s

This field shows the number of kilobytes per second received on this port.

 

 

Up Time

This field shows the total amount of time in hours, minutes and seconds the port has

 

been up.

 

 

Poll Interval(s)

The text box displays how often (in seconds) this screen refreshes. You may change

 

the refresh interval by typing a new number in the text box and then clicking Set

 

Interval.

 

 

Stop

Click Stop to halt system statistics polling.

 

 

Clear Counter

Select ALL in the Port field and then click Clear Counter to erase the recorded

 

statistical information for all ports.

 

Otherwise, select a port from the Port drop-down list box and then click Clear

 

Counter to erase the recorded statistical information for that port.

 

 

5.2.1 VDSL Summary

To view VDSL statistics, click VDSL Summary in the Status screen.

54

 

VES-1616F-3x Series User’s Guide