Chapter 32 Introducing the Commands
Table 83 mvr Commands (continued)
COMMAND |
| DESCRIPTION | P | |
| group |
| Sets the multicast group range for | 13 |
|
| the MVR. |
| |
|
|
|
| |
| inactive |
| Disables MVR settings. | 13 |
| mode |
| Sets the MVR mode. | 13 |
| <dynamiccompatible> |
|
|
|
| name <name> |
| Sets the MVR name for identification | 13 |
|
|
| purposes. |
|
| no | group | Disables all MVR group settings. | 13 |
|
| group <name> | Disables the specified MVR group | 13 |
|
|
| setting. |
|
|
| inactive | Enables MVR. | 13 |
|
| Disables the receiver port(s). | 13 | |
|
| An MVR receiver port can only |
| |
|
|
| receive multicast traffic in a multicast |
|
|
|
| VLAN |
|
|
|
|
|
|
|
| Disables the source port(s). | 13 | |
|
| An MVR source port can send and |
| |
|
|
| receive multicast traffic in a multicast |
|
|
|
| VLAN |
|
|
|
|
|
|
|
| tagged <port- | Sets the port(s) to remove VLAN | 13 |
|
| list> | tags. |
|
|
| Sets the receiver port(s). | 13 | |
| list> |
| An MVR receiver port can only |
|
|
|
| receive multicast traffic in a multicast |
|
|
|
| VLAN |
|
|
|
|
|
|
|
| Sets the source port(s). | 13 | |
| list> |
| An MVR source port can send and |
|
|
|
| receive multicast traffic in a multicast |
|
|
|
| VLAN |
|
|
|
|
|
|
| tagged |
| Sets the port(s) to include VLAN | 13 |
|
|
| tags. |
|
The following table lists the
Table 84
COMMAND |
| DESCRIPTION | P | |
vdsl- |
|
| Enters the VDSL alarm profile mode. | 13 |
alarmprofile |
|
|
|
|
<name> |
|
|
|
|
| 15minsESs |
| Sets the number of Errored Seconds | 13 |
| <threshold> |
| (ES) allowed in any |
|
|
|
| period. An alarm is triggered if this |
|
|
|
| number is exceeded. |
|
|
|
|
|
|
| 237 |
|
|