Chapter 32 Introducing the Commands

32.11.3 General Configuration Mode

The following table lists the commands in Configuration (or Config) mode.

Table 81 Command Summary: Configuration Mode

COMMAND

 

 

DESCRIPTION

P

admin-

<pw-string> <confirm-

 

Changes the administrator

14

password

string>

 

password.

 

bandwidth-

 

 

Enables bandwidth control.

13

control

 

 

 

 

bcp-

 

 

Enables Bridge Control

13

transparency

 

 

Protocol (BCP) transparency.

 

classifier

<name> <[packet-format

 

Configures a classifier. A

13

 

<802.3untag802.3tagE

 

classifier groups traffic into

 

 

therIIuntagEtherIItag

 

data flows according to

 

 

>][priority <0-7> ]

 

specific criteria such as the

 

 

[vlan <vlan-id> ]

 

source address, destination

 

 

[ethernet-type <ether-

 

address, source port number,

 

 

numipipxarprarpap

 

destination port number or

 

 

pletalkdecnetsnanet

 

incoming port number.

 

 

biosdlc][source-mac

 

 

 

 

<src-mac-addr>]

 

 

 

 

[source-port <port-

 

 

 

 

num>][destination-mac

 

 

 

 

<dest-mac-addr> ]

 

 

 

 

[dscp<0-63>][ip-

 

 

 

 

protocol<protocol-

 

 

 

 

numtcpudpicmpegpo

 

 

 

 

spfrsvpigmpigppim

 

 

 

 

ipsec> [establish-

 

 

 

 

only]][source-ip <src-

 

 

 

 

ip-addr>[mask-bits

 

 

 

 

<mask-bits>]]

 

 

 

 

[source-socket

 

 

 

 

<socket-num>]

 

 

 

 

[destination-ip <dest-

 

 

 

 

ip-addr> [mask-bits

 

 

 

 

<mask-bits>]]

 

 

 

 

[destination-socket

 

 

 

 

<socket-num>]

 

 

 

 

[inactive]>

 

 

 

 

help

 

Displays command

13

 

 

 

information.

 

cluster

<vlan-id>

 

Sets the cluster management

13

 

 

 

VLAN ID.

 

 

member <mac-address>

password

Sets the cluster member

13

 

 

<password-str>

switch's hardware MAC

 

 

 

 

address and password.

 

 

name <cluster name>

 

Configures a name to identify

13

 

 

 

the cluster manager.

 

 

rcommand <mac-address>

 

Logs into a cluster member

13

 

 

 

switch.

 

default-

<in-bandout-of-band>

 

Specifies through which traffic

13

management

 

 

flow the switch is to send

 

 

 

 

packets.

 

dhcp-relay

 

 

Enables DHCP relay settings.

13

 

223

VES-1616F-3x Series User’s Guide