Chapter 32 Introducing the Commands
Table 78 Command Interpreter Mode Summary (continued)
MODE | .DESCRIPTION | HOW TO LOGIN/ | PROMPT |
|
| ACCESS |
|
This is a | Type interface | sysname(config- | |
| and allows you to configure port | interface)# | |
| related settings. | followed by a port |
|
|
| number. For example, |
|
|
| interface port- |
|
|
| channel 10 to |
|
|
| configure port 10 on |
|
|
| the switch. |
|
|
|
|
|
This is a | To enter MVR mode, | ||
| and allows you to configure multicast | enter mvr followed by |
|
| VLAN settings. | a VLAN ID (between 1 |
|
|
| and 4094). For |
|
|
| example, enter mvr 2 |
|
|
| to configure multicast |
|
|
| settings on VLAN 2. |
|
|
|
|
|
This is a | Type vlan- | sysname(config- | |
alarmprofile | and allows you to configure VDSL | alarmprofile | vdslalarmprofile)# |
| alarm profiles.. | followed by a profile |
|
|
| name. For example, |
|
|
| vdsl- |
|
|
| alarmprofile |
|
|
| test. |
|
This is a | Type vlan- | sysname(config- | |
| and allows you to configure VDSL | profile followed by | vdslprofile)# |
| profiles. | a profile name. For |
|
|
| example, vdsl- |
|
|
| profile |
|
|
| standard. |
|
This is a | Type vlan followed | ||
| and allows you to configure VLAN | by a number (between |
|
| settings. | 1 and 4094). For |
|
|
| example, vlan 10 to |
|
|
| configure settings for |
|
|
| VLAN 10. |
|
|
|
|
|
32.9 Using Command History
The switch keeps a list of command(s) you have entered for the current CLI session. You can use any commands in the history again by pressing the up (y) or down (z) arrow key to scroll through the previously used commands and press [ENTER]. Use the history command to display the list of commands.
sysname> history enable
exit history
sysname>
216 |
| |
| ||
|
|
|