Chapter 6 Basic Setting
Figure 20 General Setup
The following table describes the labels in this screen.
Table 10 General Setup
LABEL | DESCRIPTION |
System Name | Choose a descriptive name for identification purposes. This name consists of up to |
| 32 printable characters; spaces are not allowed. |
|
|
Location | Enter the geographic location (up to 30 characters) of your switch. |
|
|
Contact Person's | Enter the name (up to 30 characters) of the person in charge of this switch. |
Name |
|
|
|
Login | Use this |
Precedence | authenticate an administrator (user for switch management). |
| Configure the local user accounts in the Access Control Logins screen. The |
| RADIUS is an external server. Before you specify the priority, make sure you have |
| set up the corresponding database correctly first. |
| Select Local Only to have the switch just check the local user accounts configured |
| in the Access Control Logins screen. |
| Select Local then RADIUS to have the switch check the local user accounts |
| configured in the Access Control Logins screen. If the user name is not found, |
| the switch then checks the user database on the specified RADIUS server. You |
| need to configure Port Authentication RADIUS first. |
| Select RADIUS Only to have the switch just check the user database on the |
| specified RADIUS server for a login username and password. |
|
|
66 |
| |
| ||
|
|
|