Chapter 6 Basic Setting
Figure 25 VDSL Alarm Profile Setup
The following table describes the labels in this screen.
Table 15 VDSL Alarm Profile Setup
LABEL | DESCRIPTION |
Name | Enter a descriptive name for identification purposes. |
|
|
15 Minute LOFs | Enter the number of Loss Of Framing seconds (LOFs) that are permitted to occur |
Threshold | within 15 minutes. |
|
|
15 Minute LOSs | Enter the number of Loss Of Signals seconds (LOSs) that are permitted to occur |
Threshold | within 15 minutes. |
|
|
15 Minute LPRs | Enter the number of Loss of PoweR seconds (LPRs) is permitted to occur within |
Threshold | 15 minutes. |
|
|
15 Minute LOLs | Enter the number of Loss Of Link seconds (LOLs) that are permitted to occur |
Threshold | within 15 minutes. |
|
|
15 Minute ESs | Enter the number of Errored Seconds (ESs) that are permitted to occur within 15 |
Threshold | minutes. |
|
|
15 Minute SESs | Enter the number of Severely Errored Seconds (SESs) that are permitted to occur |
Threshold | within 15 minutes. |
|
|
15 Minute UASs | Enter the number of UnAvailable Seconds (UASs) that are permitted to occur |
Threshold | within 15 minutes. |
|
|
Initialization | Select On to trigger an alarm for an initialization failure trap. |
Failure | Select Off to disable trap sending when a line fails to initialize. |
|
|
Add | Click Add to save the new rule to the switch. It then displays in the summary table |
| at the bottom of the screen. |
|
|
Cancel | Click Cancel to reset the fields to your previous configuration. |
|
|
Clear | Click Clear to clear the fields to the factory defaults. |
|
|
Name | This field displays the descriptive name for the alarm profile. |
|
|
LOSs | This field displays the number of Loss Of Signal (LOS) seconds that are permitted |
| to occur within 15 minutes. |
|
|
ESs | This field displays the number of Errored Seconds (ESs) that are permitted to |
| occur within 15 minutes. |
|
|
| 81 |
|
|