9
Filtering
This chapter discusses static IP and MAC address port filtering.
9.1 Filtering Overview
Filtering means sifting traffic going through the switch based on the source and/or destination MAC addresses and VLAN group (ID).
9.2 Configure a Filtering Rule
Click Advanced Application > Filtering in the navigation panel to display the screen as shown next. Scroll down to the bottom of the screen to view the summary table for the settings.
Figure 36 Filtering
The following table describes the related labels in this screen.
Table 23 FIltering
LABEL | DESCRIPTION |
Active | Make sure to select this check box to activate your rule. You may temporarily deactivate |
| a rule without deleting it by deselecting this check box. |
|
|
Name | Type a descriptive name for this filter rule. This is for identification purpose only. |
|
|
| 99 |
|
|