Chapter 33 Command Examples
where
Sets the outgoing traffic port list for a |
An example is shown next.
•Enable
•Enable ports one, three, four and five for configuration.
•Set the outgoing traffic ports as the CPU (0), seven (7), eight (8) and nine (9).
sysname(config)#
Syntax:
qos priority <0 .. 7>
where
<0 .. 7> | Sets the quality of service priority for a port. |
An example is shown next.
•Enable ports one, three, four and five for configuration.
•Set the IEEE 802.1p quality of service priority as four (4).
sysname(config)# interface
Syntax:
name
where
Sets a name for your port interface(s). |
An example is shown next.
•Enable ports one, three, four and five for configuration.
•Set a name for the ports.
sysname(config)# interface
| 257 |
|
|