Chapter 32 Introducing the Commands
Table 81 Command Summary: Configuration Mode (continued)
COMMAND |
|
| DESCRIPTION | P |
|
| Enables VLAN stacking on the | 13 | |
|
|
| device. |
|
| <SPTPID> |
| Sets the service provider’s TP | 13 |
|
|
| (Tagged Protocol) ID. |
|
| Specifies the VLAN type. | 13 | ||
wfq |
|
| Sets the switch to use Weight | 13 |
|
|
| Fair Queuing (WFQ) queuing. |
|
|
| Sets the switch to use WFQ to | 13 | |
|
|
| service all queues for the |
|
|
|
| Ethernet port. |
|
|
|
|
|
|
The following table lists the interface
Table 82 interface
COMMAND | DESCRIPTION | P | ||
interface port- |
|
| Enables a port or a list of ports for | 13 |
channel <port- |
|
| configuration. |
|
list> |
|
|
|
|
| bandwidth- |
| Enables bandwidth control on the | 13 |
| limit |
| port(s). |
|
|
| cir <Kbps> | Sets the guaranteed bandwidth | 13 |
|
|
| allowed for incoming traffic on the |
|
|
|
| port(s). |
|
|
|
|
|
|
|
| egress <Kbps> | Sets the maximum bandwidth allowed | 13 |
|
|
| for outgoing traffic on the port(s). |
|
|
| pir <Kbps> | Sets the maximum bandwidth allowed | 13 |
|
|
| for incoming traffic on the port(s). |
|
|
| Sets how Bridge Protocol Data Units | 13 | |
| <peertunnel |
| (BPDUs) are used in STP port states. |
|
| discardnetwo |
|
|
|
| rk> |
|
|
|
| broadcast- |
| Enables broadcast storm control limit | 13 |
| limit |
| on the switch. |
|
|
| <pkt/s> | Sets how many broadcast packets the | 13 |
|
|
| interface receives per second. |
|
| cable_diagnos |
| Displays whether a cable is connected | 13 |
| tics |
| to the port (good) or not (open). |
|
| diffserv |
| Enables DiffServ settings on the | 13 |
|
|
| port(s). |
|
|
| Enables the Destination Lookup | 13 | |
|
|
| Failure (DLF) limit. |
|
|
| <pkt/s> | Sets the interface DLF limit in packets | 13 |
|
|
| per second (pps). |
|
| egress set |
| Sets the outgoing traffic port list for a | 13 |
|
|
| ||
| 233 |
|
|