|
| Chapter 6 Basic Setting | |
| Table 9 System Info (continued) | ||
| LABEL | DESCRIPTION |
|
| Current | This field displays this fan's current speed in Revolutions Per Minute (RPM). |
|
|
|
|
|
| MAX | This field displays this fan's maximum speed measured in Revolutions Per Minute |
|
|
| (RPM). |
|
|
|
|
|
| MIN | This field displays this fan's minimum speed measured in Revolutions Per Minute |
|
|
| (RPM). |
|
|
|
|
|
| Threshold | This field displays the minimum speed at which a normal fan should work. |
|
|
|
|
|
| Status | Normal indicates that this fan is functioning above the minimum speed. Error |
|
|
| indicates that this fan is functioning below the minimum speed. |
|
|
| If Error displays, it is recommended that the fan(s) on the switch be replaced by a |
|
|
| qualified technician. |
|
|
|
|
|
| Voltage (V) | The power supply for each voltage has a sensor that is capable of detecting and |
|
|
| reporting if the voltage falls out of the tolerance range. |
|
|
|
|
|
| Current | This is the current voltage reading. |
|
|
|
|
|
| MAX | This field displays the maximum voltage measured at this point. |
|
|
|
|
|
| MIN | This field displays the minimum voltage measured at this point. |
|
|
|
|
|
| Threshold | This field displays the percentage tolerance of the voltage with which the switch still |
|
|
| works. |
|
|
|
|
|
| Status | Normal indicates that the voltage is within an acceptable operating range at this |
|
|
| point; otherwise Error is displayed. |
|
|
| If Error displays, an electronic component might be defective. Have the switch |
|
|
| serviced by a qualified technician. |
|
|
|
|
|
| Poll Interval(s) | The text box displays how often (in seconds) this screen refreshes. You may change |
|
|
| the refresh interval by typing a new number in the text box and then clicking Set |
|
|
| Interval. |
|
| Stop | Click Stop to stop port statistic polling. |
|
|
|
|
|
6.3 General Setup
Click Basic Setting and General Setup in the navigation panel to display the screen as shown. Use this screen to configure the system name, the system time and date and specify the login authentication database priority.
| 65 |
|
|