Chapter 6 Basic Setting

Figure 27 VDSL PSD Profile Setup

The following table describes the labels in this screen.

Table 16 VDSL PSD Profile Setup

LABEL

DESCRIPTION

Profile Name

Enter a descriptive name for identification purposes. This field is configurable only

 

when you click the Add New Profile link.

 

 

Add New Profile

Click this link to add a new profile.

 

 

Add

Click Add to save the new profile to the Switch. It then displays in the summary

 

table at the bottom of the screen.

 

 

Down Stream /

 

Up Stream

 

 

 

Tone Freq

Enter a downstream or upstream tone frequency between 0 and 30000 (in kHz).

 

 

PSD Level (dBm/

Specify a downstream or upstream PSD value between 125 and 1400 in units of -

Hz)

0.1 dBm/Hz. For example, if you want to set the transmit power to -20 dBm/Hz,

 

enter 200.

 

 

Add

Click Add to save the new breakpoint to the Switch. It then displays in the

 

summary table in the center of the screen.

 

 

BreakPoint

This is the index number of each breakpoint.

 

 

Tone Freq

This displays the tone frequency for this breakpoint.

 

 

PSD Level (dBm/

This displays the transmit power for this breakpoint.

Hz)

 

 

 

Delete

Check the breakpoint(s) that you want to remove in the Delete column and then

 

click the Delete button.

 

 

Profile Name

This field displays the descriptive name for this profile.

 

 

Applied Ports

You can apply a profile to a VDSL port in the Port Setup screen.

 

This field displays the VDSL port number(s) to which this profile is applied.

 

 

Delete

Check the profile(s) that you want to remove in the Delete column and then click

 

the Delete button.

 

 

Cancel

Click Cancel to clear the selected checkboxes in the Delete column.

 

 

 

83

VES-1616F-3x Series User’s Guide