Chapter 34 IEEE 802.1Q Tagged VLAN Commands

3The switch ignores the port from which the frame came, because the switch does not send a frame to the port from which it came. The switch also does not forward frames to “forbidden” ports.

4If after looking at the SVLAN, the switch does not have any ports to which it will send the frame, it won’t check the port filter.

34.4Delete VLAN ID

Syntax:

no vlan <vlan-id>

where

<vlan-id> = The VLAN ID [1 – 4094].

This command deletes the specified VLAN ID entry from the static VLAN table. The following example deletes entry 2 in the static VLAN table.

sysname(config)# no vlan 2

34.5 Enable VLAN

Syntax:

vlan <vlan-id>

This command enables the specified VLAN ID in the SVLAN (Static VLAN) table.

34.6 Disable VLAN

Syntax:

vlan <vlan-id> inactive

This command disables the specified VLAN ID in the SVLAN (Static VLAN) table.

34.7 Show VLAN Setting

Syntax:

show vlan

This command shows the IEEE 802.1Q Tagged SVLAN (Static VLAN) table.

264

 

VES-1616F-3x Series User’s Guide