Chapter 32 Introducing the Commands

Table 81 Command Summary: Configuration Mode (continued)

COMMAND

 

DESCRIPTION

P

 

 

ssh

Disables SSH (Secure Shell)

13

 

 

 

server access to the switch.

 

 

 

telnet

Disables telnet access to the

13

 

 

 

switch.

 

 

snmp-server

trap-destination

Disables sending of SNMP

13

 

 

<ip>

traps to a station.

 

 

spanning-tree

 

Disables (R)STP.

13

 

 

<port-list>

Disables (R)STP on the

13

 

 

 

specified ports.

 

 

ssh

key <rsa1rsadsa>

Disables the secure shell

13

 

 

 

server encryption key. Your

 

 

 

 

switch supports SSH versions

 

 

 

 

1 and 2 using RSA and DSA

 

 

 

 

authentication.

 

 

 

 

 

 

 

 

known-hosts

Removes all remote hosts.

13

 

 

known-hosts <host-

Removes the specified remote

13

 

 

ip>

hosts from the list of all known

 

 

 

 

hosts.

 

 

 

known-hosts <host-

Removes remote known hosts

13

 

 

ip> [1024ssh-

with the specified public key

 

 

 

rsassh-dsa]

(1024-bit RSA1, RSA or DSA).

 

 

storm-control

 

Disables broadcast storm

13

 

 

 

control.

 

 

syslog

 

Disables syslog logging.

13

 

 

server <ip-

Disables syslog logging to the

13

 

 

address>

specified syslog server.

 

 

 

server <ip-

Enables syslog logging to the

13

 

 

address> inactive

specified syslog server.

 

 

 

type <type>

DIsables syslog logging for the

13

 

 

 

specified log type (sys,

 

 

 

 

link, config, error or

 

 

 

 

report).

 

 

timesync

 

Removes the time server

13

 

 

 

protocol.

 

 

trunk <T1>

 

Disables port group trunking.

13

 

 

interface <port-

Removes ports from the trunk

13

 

 

list>

group.

 

 

 

lacp

Disables LACP in the trunk

13

 

 

 

group.

 

 

vdsl-alarmprofile

<profile-name>

Removes a VDSL alarm

13

 

 

 

profile. You cannot delete a

 

 

 

 

default profile (DEFVAL).

 

 

 

 

 

 

 

vdsl-profile

<profile-name>

Removes a VDSL profile. You

13

 

 

 

cannot delete a default profile

 

 

 

 

(DEFVAL).

 

 

 

 

 

 

 

vdsl-psd profile

<profile-name>

Removes a VDSL PSD profile.

13

 

 

 

You cannot delete a default

 

 

 

 

profile (DEFVAL).

 

 

 

 

 

 

228

 

VES-1616F-3x Series User’s Guide