Chapter 15 Port Authentication
15.2.2 Configuring RADIUS Server SettingsFrom the Port Authentication screen, click RADIUS to display the configuration screen as shown.
Use this screen to configure RADIUS server settings. See Section 15.1 on page 117 for background information.
Figure 47 Port Authentication > RADIUS
The following table describes the labels in this screen.
Table 36 Port Authentication > RADIUS
LABEL DESCRIPTION
Authentication Server
IP Address | Enter the IP address of the external RADIUS server in dotted decimal notation. |
|
|
UDP Port | The default port of the RADIUS server for authentication is 1812. You need not |
| change this value unless your network administrator instructs you to do so. |
|
|
Shared Secret | Specify a password (up to 32 alphanumeric characters) as the key to be shared |
| between the external RADIUS server and the switch. This key is not sent over the |
| network. This key must be the same on the external RADIUS server and the switch. |
|
|
Apply | Click Apply to save your changes back to the switch. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
| 119 |
|
|